All of our nozzles and fittings are heavy duty, nickel plated metal. These are the finest, most sturdy misting components on the market today. All are push to connect and quick disconnect and are built to satisfy extreme applications. They are non-corrosive and need absolutely no maintenance whatsoever.
You will not find a more durable, longer lasting nozzle assembly or fitting anywhere.
$ 7.75
The Tee Fitting allows you to branch off into two different directions from one section of tubing.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Elbow Fitting is used when you connect two sections of tubing coming at right angles. The Elbow Fitting eliminates the possibility of crimping your tubing by bending it around corners.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Coupling simply connects two piece of tubing. These are perfect if a mistake was made when cutting your tubing or if you want to remove a spray nozzle from an area. Essentially, the Coupling is a way to splice two pieces of tubing together.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 5.50
The NOZZLE BODY ADAPTER is used to create a spray nozzle.
One on end, you would place either a tee fitting, and elbow fitting, or a straight fitting, depending on the type of nozzle you are making. On the other end, you would screw in one of our Replacement Spray Nozzle Tips.
This NOZZLE BODY ADAPTER is sold separately and does not include any fittings or nozzle tips.
$ 11.25
This REPLACEMENT SPRAY NOZZLE TIP WITH O-RING and bronze filter fits ALL of our nozzle assemblies as well as most nozzle assemblies sold. Simply unscrew your old tip and screw this one in.
Like our nozzle assemblies and fittings, these are heavy duty nickel plated and they provide accurate flow and spray angle.
$ 3.20
BRONZE FILTER FOR SPRAY NOZZLE TIPS fits on most all spray nozzle tips.
These filters can be easily changed on your spray nozzle tips and will sometimes be enough to eliminate debris from non-working spray nozzles. They simply unscrew and screw back in.
Many times replacing this filter can save you from replacing the entire tip.
$ 15.00
The In-Line Shut Off Valve is used to shut down sections of your misting system when that section does not need insect control. This prevents insecticide waste from misting unused areas of your facility.
The section that you would turn off has to be a separate run, not in a loop with the rest of your system.
This In-Line Shut Off Valve only works on 1/4" tubing.
$ 17.00
The 4-Way Cross Connector is mainly used in larger system designs where you would have tubing coming into one common area from 4 different locations. It connects 1/4" tubing to and from these locations.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 15.60
The Inline Filter removes impurities that may be in your suction tubing BEFORE they reach your facility tubing and nozzles, which helps prevent clogging of your nozzles. These are recommended for systems that use well water or hard water.
Fits 1/4" tubing just like our nozzle assemblies and fittings.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 15.00
Inline Check Valves allow flow in one direction and automatically prevents back flow or reverse flow when fluid in the tubing reverses direction.
These are primarily used in system designs where there is a large number of spray nozzles and large lengths of tubing. They are connected to your tubing to ensure that spray nozzles furthest from the pump receive adequate pressure at the same time as those spray nozzles closest to the pump, when the system activates.
$ 19.00
This is a replacement Needle Valve that works with your PSI Gauge to control and adjust PSI output.
$ 6.75
The Swivel Elbow is the part that is used to connect the tubing that comes out of the system and runs out to your facility, where it connects to your spray nozzles.
See FIG 3 in the additional product images for to see where the product is located.
$ 7.25
The 3/8" Swivel Elbow is the part that is used to connect the Intake Tube Assembly that comes out of the system and connects to the pump.
See RED ARROW in the additional product image for to see where the product is located.
$ 6.75
The Swivel Elbow is the part that is used to connect the tubing that comes out of the system and runs out to your facility, where it connects to your spray nozzles.
See FIG 3 in the additional product images for to see where the product is located.
$ 21.50
Protect your misting system spray nozzles from clogging with calcium and hard water build-up with this hose end hard water filter. It helps keep your misting system free of dirt, sediment, and scaling that can clog the spray nozzles in your misting system.
This hard water filter connects directly to your garden hose and adds a great layer of protection when filling your misting system from hard water sources. Fits standard hoses 3/4" male by 3/4" female.
It is recommended that the filter be replaced every 6 months.
$ 79.99
This is the entire housing connection that contains a pressure gauge, needle valve, return and outgoing tube connection fittings. It screws directly into your system pump.
See the 2nd picture in the product description that shows exactly what this replaces. See area circled in red.
IMPORTANT!! This product uses 3/8" return line tubing that connects to the needle valve and returns into your reservoir tank. You can see the tubing in the 2nd picture. Please let us know below if you need this tubing. We will provide it at no charge.
$ 1.99
SPRAY NOZZLE TOOL FOR DISASSEMBLING nozzles and fittings from tubing.
Use the U-shaped end to push nozzle and fitting connectors inward to release the "teeth" that holds the nozzle or fitting to the tubing.
One side of the tool is used for 1/4" nozzles and fittings and the other side is for 3/8".
Under No Circumstances Will We EVER Share Your Email Address
© 2024 Dead Fly Zone.
