PBF
$ 3.20
BRONZE FILTER FOR SPRAY NOZZLE TIPS fits on most all spray nozzle tips.
These filters can be easily changed on your spray nozzle tips and will sometimes be enough to eliminate debris from non-working spray nozzles. They simply unscrew and screw back in.
Many times replacing this filter can save you from replacing the entire tip.
$ 7.75
The Tee Fitting allows you to branch off into two different directions from one section of tubing.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Elbow Fitting is used when you connect two sections of tubing coming at right angles. The Elbow Fitting eliminates the possibility of crimping your tubing by bending it around corners.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Coupling simply connects two piece of tubing. These are perfect if a mistake was made when cutting your tubing or if you want to remove a spray nozzle from an area. Essentially, the Coupling is a way to splice two pieces of tubing together.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.