$ 79.99
This is the entire housing connection that contains a pressure gauge, needle valve, return and outgoing tube connection fittings. It screws directly into your system pump.
See the 2nd picture in the product description that shows exactly what this replaces. See area circled in red.
IMPORTANT!! This product uses 3/8" return line tubing that connects to the needle valve and returns into your reservoir tank. You can see the tubing in the 2nd picture. Please let us know below if you need this tubing. We will provide it at no charge.
$ 7.75
The Tee Fitting allows you to branch off into two different directions from one section of tubing.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Elbow Fitting is used when you connect two sections of tubing coming at right angles. The Elbow Fitting eliminates the possibility of crimping your tubing by bending it around corners.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 6.75
The Coupling simply connects two piece of tubing. These are perfect if a mistake was made when cutting your tubing or if you want to remove a spray nozzle from an area. Essentially, the Coupling is a way to splice two pieces of tubing together.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
Under No Circumstances Will We EVER Share Your Email Address
© 2024 Dead Fly Zone.
